English
Fran?aise
Deutsch
ܧڧ
Espa?ol
rabe
Polski
Italiano
Portugus
+86 - 138 5079 9496
+86 - 595 - 2228 7926 
newstarstone
How to Polish a Granite Boulder
Formed deep beneath the Earth's surface and beloved for its variegated grain and long history of use in traditional stonework, granite is one of hardest and most visually striking natural materials around. If you are lucky enough to have a granite boulder on your lawn or in your home, you know the sculptural presence that a large chunk of granite has. To augment the appearance of your boulder, make it sparkle with a thorough cleaning and polishing. Sealing the stone will also prevent future damage caused by water and other foreign substances.
Create a sudsy solution of dish soap and hot water. Scrub the boulder with the soapy water, using a scrub brush. Spray the boulder with a garden hose to rinse the soap residue.
Spray the stone with stone cleaner, wiping off the cleaner as you go with a towel. Leave the boulder to dry.
Equip a polisher-grinder with a 50-grit diamond-polishing pad for granite. Separate types of polishing pads are available for white stone and for black stone.
Mist the first area to polish lightly with water. Start the polisher-grinder and hold the spinning pad flat against the stone's surface. Skate the pad slowly up and down and around the boulder. Stop and spray more water, as needed.
Switch to a 100-grit diamond-polishing pad and polish the stone again.
Continue to switch grits, moving through and re-polishing with 200, 400, 800, 1,500, 3,000 and 10,000-grit pads.
Wipe down the boulder with a damp towel.
Spray the boulder with granite sealer, wiping the surfaces of the granite lightly with a towel. Allow the sealer to dry, and then apply a second coat.
