Decorative stone If you want to use in order to get the ideal decorative effect. Must be from the packaging, transportation and custody of the staff.

1, stone packaging.

Stone sheet packaging should be based on the number and transport conditions and other factors specific decision. Packaging is nothing more than divided into wooden box packaging, rope packaging. For long-distance transport, generally use this method. Will be relatively smooth sheet. Sequential stand in the box containing moisture-proof paper. The Wooden box must not use other materials. Each box should be added at both ends of the iron waist hoop, crossed on the iron angle. There are two cases of rope packaging. One is the relative surface of the plate with a diameter of not less than 10 mm of the rope along the long and wide direction of winding. Do not expose the product and bind it firmly. Another kind of packaging is the light surface relative to the plate with a diameter of not less than 10mm rope according to "well" shape tied, each binding point should not be less than 3 Road. The After the sheet is packed, it should be marked with the plate number or name, specifications and quantity. The supporting materials shall be numbered according to the drawings on each sheet. Packing box and packaging rope must have "up", "moisture", "carefully" indicator, its symbols and use should be consistent with GBl91-73 "packaging and storage instructions" requirement.

2, decorative stone plate transport.

Handling and handling must comply with the following provisions: (1) handling should be light and light, is strictly prohibited to roll, the vertical code must be placed on the back edge of the first landing; (2) stone sheet monolithic area of ​​more than 0.25m2, all upright handling. (3) wooden box packaging products, with the lifting equipment loading and unloading, each time to lift a box is appropriate. (4) loading code should be placed in accordance with the requirements of storage, transport required a smooth, non-collision.

3, stone plate storage.

Stone plate should be stored indoors, outdoor storage must be covered. Plate upright placed, should be relative to the light, the tilt should not be greater than 15 °, stacking height to 1.6m is appropriate, the bottom and the layers must be non-polluting elastic material support pad. Can not be placed upright, the surface should be relatively smooth, the ground should be flat and solid, layers of pad should be in the same vertical line, stacking high to 1m is appropriate. After packaging the product, the code height of 2m is appropriate.

Decorative stone on the packaging technology requirements are more stringent, packaging is not correct. Light caused by angular damage, severe cases may be broken. Transport is not in good condition. Increased number of rejects and defective products. So, we should pay attention to the daily storage.